(Fixed) Tineco iFloor 2 Not Spraying Water

Discover easy methods to resolve the Tineco iFloor 2 not spraying water issue. Learn how to troubleshoot and apply simple steps to restore your iFloor 2’s spraying functionality. Find effective solutions and share your insights in our helpful guide!

Having issues with your Tineco iFloor 2 spraying water? we get it. A common concern that many users encounter is when their iFloor 2 doesn’t seem to spray water as it should while cleaning. But worry not! In this article, we’ll break down the possible reasons behind this problem and provide simple steps to troubleshoot and fix the issue. 

I made this guide that’s really easy to follow, so you don’t have to call Tineco for help. Just follow the steps below, and your iFloor 2 will be back to normal! You don’t need to be a tech expert to follow these steps – just a bit of patience and the desire to get your iFloor 2 spraying water and working efficiently again.

Why is My Tineco iFloor 2 is Not Spraying Water?

Sometimes, your Tineco iFloor 2 may stop spraying water for a variety of reasons. This could happen if the water tank isn’t filled up or placed just right, if the pump that sprays water gets a bit stuck if the little hole where the spray comes out gets clogged, if the machine needs a quick self-clean, or if you’re using a cleaning mix that the company didn’t recommend.

Here are a few things you might want to consider when your brand new Tineco iFloor 2 not spraying water:

• The water tank is feeling less than one-third full.
• The spray hole’s got something blocking its way.
• The water tank isn’t properly installed.
• Your iFloor 2 rarely gets used 
• The battery might be low.

How to Fix Tineco iFloor 2 Not Spraying Water Easily

Alright, now that we’ve covered the reasons behind your Tineco iFloor 2 not spraying water, let’s see what we can do to fix it!

Just follow each method accurately, one after the other, and be sure to test your Tineco iFloor 2 each time to check if the issue has been resolved.

Check the Clean Water Tank

This might sound simple, but we sometimes forget even the most basic things. Make sure the clean water tank is properly filled. If the tank isn’t at least one-third full, your iFloor 2 might not spray water as it should. Check it out, and if it’s not filled enough, fill it up.

It’s easy to underestimate the importance of this step but trust me, a well-filled tank can make a real difference in getting your iFloor 2 spraying again. 

Here are the steps you should follow:

1. Take out the clean water tank from your iFloor 2.
2. Take a look inside and make sure the water inside is more than one-third full. Ideally, it should be filled up to the Max line for the best performance.
3. If the water level is low, you’ll need to refill the tank. However, make sure the water is clean.
4. Once the tank is refilled, put it back into your iFloor 2. Make sure it’s placed securely and properly.

Spray Pump Blockage

If your spray pump is unused, it’s possible that the spray holes are clogged with dirt that’s built up over time. Similarly, if the brush roller of your Tineco iFloor vacuum cleaner gets entangled with hair, the water won’t spray as it should.

Here’s what you can do to fix this:

1. Make sure your Tineco vacuum cleaner is turned off and unplugged.
2. Take off the roller brush from the vacuum head.
3. Clean the cover of the brush roller. This helps get rid of any hair or stuff that’s stuck to it.
4. Use a brush and a slightly damp cloth to clean the debris from the roller brush. This ensures it’s free of debris that could slow it down.
5. If there’s a clog in the spray hole, gently clear it with a thin, pointed tool like a fine needle. Use a damp cloth to wipe down the other parts too.
6. Reattach the brush roller to its place.
7. Turn on your Tineco vacuum cleaner and let it run a test cycle. 

Remove Clogs from the Sprayer

Let’s move on to the next step: checking if something’s blocking the sprayer hole. It might not look big, but sometimes small things can cause big problems. When you’re cleaning, little bits of stuff might get into the sprayer hole. Over time, they can pile up and stop the water from coming out smoothly. 

Follow these steps and give your iFloor 2 a good clean-up.

You should follow these steps:

1. First, remove the brush roller from the front part of your vacuum.
2. Look inside the space where the brush roller was. See if there’s anything blocking it.
3. If you find any stuff in there, use a slightly wet cloth to clean it out. Get rid of any junk that’s hanging around.
4. If the water still isn’t spraying right, you can give unclogging the spray hole a shot. Use a thin needle or something similar to gently clear away any blockage.

Incorrect Installation of CWT

Here’s another simple but super important thing to check. Sometimes, without realizing it, the clean water tank may not be installed properly.

And remember, the brush roll cover needs to be in the right spot too. If it’s not, your vacuum cleaner won’t spray water properly. So, let’s make sure everything’s put together the right way.

Here’s how you can fix it:

1. Make sure it’s not powered on.
2. Take off the clean water tank from your vacuum.
3. Empty out the tank and then refill it with clean water. Make sure the water level is between one-third and the maximum line.
4. Reinstall the clean water tank in its correct spot. Also, don’t forget to keep the brush roll cover in its place.
5. Switch your vacuum cleaner on and let it run a test cycle to check if things are back on track.

Note: Check if your vacuum roller brush has hair or debris stuck in it. If it does, give it a clean. This can help keep everything running smoothly.

Self-Cleaning Cycle

Let’s move on to the next trick: giving your Tineco iFloor 2 a self-cleaning cycle. Sometimes, all it needs is a bit of a refresher!

With a self-cleaning cycle, the iFloor 2 will be able to clear out any lingering issues and get ready for its next cycle.

Here’s how it works:

1. The first step is taking off the clean water tank and filling it up to the Max line.
2. Make sure the tank is securely back in its spot, and you’re good to go.
3. Place your Tineco on its storage pad and plug it in – getting it all set up.
4. Press the ON button on the machine for a long time – about 3 seconds will do. This is the signal to start the self-cleaning cycle.
5. Now, all you have to do is wait.

Use Tineco’s Cleaning Solution

Now, let’s talk about the stuff you use to clean. You should know that using anything other than Tineco’s approved cleaning solution can mess up your warranty.

So, stick with what works – no need for fancy stuff like foamy bubbles or smelly oils.  You can order the authentic Tineco’s Cleaning Liquid from Amazon and after you receive it, take a look at the bottle’s instructions. They’ll tell you how much liquid to use for your Tineco iFloor 2 to perform at its best.

Contact Tineco Customer Support

If you’ve tried everything and your Tineco iFloor 2 still won’t spray water, don’t worry. You can rely on Tineco’s customer support team. Tineco’s support team can guide you through advanced troubleshooting of your iFloor 2 water spraying issue.

If your iFloor 2 is still under warranty, Tineco can sort things out. Remember, your iFloor 2 comes with a 2-year warranty ( it’s best to check the papers that came with your machine). So, the support team will make sure your machine gets the care it needs. 

RELATED ARTICLES: – 

• Tineco Vacuum Keeps Shutting Off: Reasons & Solutions
• Tineco Ifloor 3 Max Light Flashing? (Fix Easily)

Hopefully, this guide has been of great assistance in resolving the Tineco iFloor 2 not spraying water issue. Please share in the comments which method proved effective for you. Additionally, if you’re aware of any other troubleshooting methods, we’d love to hear from you.