Have trouble with your Prettycare vacuum brush not spinning? We’ve got the simple solutions to get it fixed quickly!
Prettycare is a popular vacuum brand with a commitment to providing high-end quality at affordable prices, making innovation accessible to everyone. Their vacuum allows you to effortlessly reach those hidden spaces under your furniture, ensuring no dust, hair, crumbs, or fine particles are left behind.
If you are a user of this brand, we understand how frustrating it can be when your Prettycare vacuum brush not spinning as it should but worry not!
In this article, we’ll walk you through the simple steps to get your Prettycare vacuum brush spinning smoothly again, so you can enjoy cleaner floors instantly.
Why is My Prettycare Cordless Vacuum Brush Not Spinning?
If your Prettycare cordless vacuum brush isn’t spinning, there could be a few reasons for it. First, take a look at the roller. If it’s got hair or stuff stuck in it, that can stop it from moving.
Secondly, check if you have the right setting for your floor. Sometimes, if it’s not set correctly, the brush won’t spin. And lastly, if the brush roller itself is broken, that’s a definite reason why it won’t spin.
Don’t worry, though; we’ll help you figure out which one it is and how to fix it so your vacuum can get back to cleaning your floors properly.
How to Fix Prettycare Vacuum Brush Not Spinning
Ensure that the brush has no hair and debris
To fix it, you can do this: find a circular plastic spinner on the side of the floorhead, and use it to unlock the brush roller. Take the roller out and cut off any hair or stuff that’s stuck to it.
Then, check that the roller can spin easily in its socket. When it’s spinning freely, put it back in its place. This should make your vacuum brush work again and be able to clean your floors as well as it did before.
The Prettycare vacuum has a major design flaw where dirt and hair can clog the brush bearings, causing the roller to jam. This issue requires disassembly and cleaning, making it less suitable for purchase due to the inconvenience it poses.
Make sure the floor type settings are correct
Sometimes, the reason your Prettycare vacuum brush isn’t spinning is that you’ve got the wrong floor setting. If you’ve set it to work on bare floors, the brush won’t spin. That’s to protect your hard floors from getting damaged.
So, before anything else, check your floor setting. If your Prettycare vacuum doesn’t have this setting, you can skip this method.
Replace the brush roller
If you have set your floor type correctly and cleaned out your Prettycare vacuum brush but it is still not spinning, it might be an indication that the brush roller itself is worn out or damaged beyond repair. In such cases, the best option would be to replace the brush roller with a new one.
Before you go ahead with the replacement, ensure that you’ve ordered the correct brush roll that matches your specific Prettycare vacuum model. Using the wrong replacement part may not fit or work correctly.
Once you have received the proper replacement brush roller, follow these simple steps to install it:
- Locate the rolling brush release button, which is usually found on the underside of the vacuum head, and press it to open up the brush compartment.
- Carefully remove the old brush roll from its position. Be sure to note how it’s attached so that you can replicate the process with the new brush roller.
- Insert the new roller brush into the same position, making sure that it fits snugly and correctly clicks into place. The brush needs to be installed properly to ensure that the brush spins as intended during operation.
By following these steps and replacing the brush roller with the correct part, you should resolve the issue of your Prettycare vacuum brush not spinning, so that your vacuum can clean your floors efficiently.
Contact Prettycare support
If you find that none of the previously mentioned methods resolve the issue with your Prettycare vacuum brush not spinning, it’s recommended to reach out to Prettycare’s customer support for assistance. They can provide further guidance and potentially offer a solution to your problem. Here are the contact email details for different regions:
- United States (US): us@prettycarelife.com
- Canada (CA): vip.us@prettycarelife.com
- European Union (EU): eu@prettycarelife.com
- Japan (JP): jp@prettycarelife.com
- United Kingdom (UK): uk@prettycarelife.com
ALSO READ: –
So, next time your Prettycare vacuum brush suddenly stops spinning, remember these three simple steps: clear out any trapped hair and debris, ensure you’ve chosen the right floor settings, and consider replacing a broken brush roller. If none of these work, contact their support to get assistance or free repair/replacement if it is under warranty.
RELATED ARTICLES: –
- Tineco Vacuum Keeps Shutting Off: Reasons & Solutions
- Sirena Vacuum Vs Rainbow (Comparison)
- How to Fix Shark Robot Vacuum Error 9 (QUICKLY)
- (Fixed) Tineco Floor One S3 Not Charging
- (Fixed) Tineco iFloor 2 Not Spraying Water
- Tineco Ifloor 3 Max Light Flashing? (Fix Easily)
Frequently Asked Questions (FAQs)
How long do Prettycare vacuum cleaner brushes last?
Prettycare vacuum cleaner brushes wear out over time due to continuous rubbing against the carpet. The vacuum cleaner roller brushes can flatten and get too soft, making them need to be replaced often.
How often should I replace my Prettycare vacuum brush roller?
You should consider replacing your Prettycare vacuum brush roller every 1-2 years. If you use it every day, you may have to replace it quite often. Check for worn-out and loose bristles as a sign that it’s time for a replacement.
